|
 |
CC Racing Performance Flex Shaft assemblies with welded Stainless Steel stub
shafts
"STANDARD - left hand rotation, Round end collet drive"
1/4” x 21” Long Flex Shaft - $36.50 each
(Export price AU$
33.20)
1/4” x 28” Long Flex Shaft
- $37.95 each (Export price AU$
34.50)
1/4” x 36” Long Flex Shaft
- $41.95 each (Export price AU$
38.15) |
|
 |
CC Racing Performance 1/4" Square both end Flex Shaft
"STANDARD - left hand rotation"
1/4” x 47”
Square both ends flex shaft
- $14.95 each (Export AU$
13.60) |
|
 |
CC Racing "Tapered" 1/4" SS Drive Dog
1/4" stainless steel drive
dog with "Tapered Leading Edge".
Price: $
5.50 each inc. GST (Export price AU$
5.00) |
|
 |
CC Racing "Standard" 1/4" SS Drive Dog
Standard 1/4" stainless steel
drive dog.
Price: $
5.50 each inc. GST (Export price AU$
5.00) |
|
 |
CC Racing "Super Collet"
If you're
tired of losing prop shafts and your expensive props then the CC Racing
Heavy Duty Super Collet is the collet you are looking for.
This new improved
design puts the crimping force of the insert at the end of the collet
instead of inside the collet where your shaft can slip out. Once you have
used one of these Super Collets you will never buy any other collet.
Made from high
quality Stainless Steel and is a heavy duty unit that uses standard 5/8
wrenches to tighten on the shaft.
Suits
Zenoah, QD & RCMK
gas engines to 1/4" round cable
CAUTION:
Beware of inferior quality copy collets with a fine thread that can easily cross or
strip threads but more importantly thread galling causing the collet to
seize.
Price: $
14.95 each inc. GST (Export price AU$
13.60)
Super Collet to suit 1/4"
square drive flex - $18.30
(Export AUD 16.65) |
|
 |
CC Racing "Super Collet" Replacement Round Insert
Replacement 1/4" round
stainless steel insert for CC Racing Super Collet.
Price: $
5.95 each inc. GST (Export price AU$
5.40) |
|
 |
CC Racing "Super Collet" Square Drive Insert
Stainless Steel 1/4" square
drive insert for CC Racing Super Collet.
Price: $
9.30 each inc. GST (Export price AU$
8.45) |
|
 |
CC Racing Monster V2 "Stainless Steel" exhaust system
This is the
latest design, more powerful, Monster V2 "stainless steel tuned pipe
featuring an adjustable length internal stinger for the ultimate in
adjustable tuned pipes.
System comes
complete with no leak
water cooled exhaust flange, 1" O.D. stainless
steel header, stainless steel tuned pipe clamp and Monster V2 stainless steel tuned
pipe with adjustable length 10.6mm I.D. internal stinger and billet alloy stinger clamp
Select
either 100 Deg,
105 Deg, 90 Deg +1", +2" or +3"
header
$ 198.00 inc. GST (Export price AU$
180.00)
|
|
 |
CC Racing Monster V2 "Stainless Steel" Tuned
Pipe "only"
This is the
latest design, more powerful, Monster V2 "stainless steel tuned pipe
featuring an adjustable length internal stinger for the ultimate in
adjustable tuned pipes. (Requires 1" OD Header)
Comes
complete with
Monster V2 stainless steel tuned pipe with adjustable length 10.6mm I.D. internal stinger
and billet alloy stinger clamp plus stainless steel tuned pipe clamp.
$ 158.00 inc. GST (Export price AU$
143.65)
|
|
 |
CC Racing 1" Stainless Steel Headers
CC Racing
USA 1" diameter stainless steel exhaust headers are available in the
following angles:
100 Deg,
105 Deg, 90 Deg +1", 90 Deg +2" & 90 Deg +3"
90 Deg +1" headers are back
in stock
Price:
$ 21.00 each inc. GST (Export
price AU$ 19.10)
|
 |
CC Racing 1" SS Drop Header
CC Racing
1" SS Header - 90 deg +2"
offset with 2" DROP
Price:
$ 21.00 each inc. GST (Export
price AU$ 19.10)
|
|
 |
CC Racing 1" No Leak Exhaust Flange
1"
No-leak water cooled exhaust flange comes complete with 1" Viton O-Rings,
Brass water fittings and stainless steel mounting bolts.
Fits Zenoah
and RCMK exhaust ports.
Price:
$ 32.90 each inc. GST (Export
price AU$ 29.90)
|
|
 |
CC Racing 1" High Temp VITON O-Ring
CC Racing 1"
I.D. High Temperature Viton O-Rings to suit all CC Racing exhaust flanges
and Powermaster tuned pipes.
Price:
$ 1.20 each inc. GST (Export
price AU$ 1.10) |
|
 |
CC Racing Monster V2 "Split" SS Pipe Clamp
CC
Racing "Split" stainless steel tuned pipe clamp to suit Monster V2 tuned pipe
with 1" OD headers. Includes two stainless steel cap head bolts for secure
clamping of tuned pipe and header.
$ 38.90 inc. GST (Export price AU$
35.40)
|
|
 |
CC Racing 1/4" Super Stinger Drive Assembly
Super Stinger Drive is
adjustable up and down on the transom with slotted holes. (For different
sized props).
Super Stinger Drive Arm
has plenty of adjustment for positive or negative angle and has indexed
lines for easy reference. (For adjusting ride attitude to different water
conditions)
Super Stinger Drive
overall length is
also adjustable from 4" to 5"
long measured from the transom. Loosen the two set screws and slide barrel in or out to suit
your application.
Super Stinger Drive comes with stainless
steel 8/32" mounting bolts.
Price: $
59.00 each inc. GST (Export price AU$
53.65)
|
|
 |
CC Racing Billet Alloy Carb Pump Cover
CC Racing billet
aluminum black anodized carb pump cover for Walbro style carbs. There a lot of
these style units on the market that are a cheap import just for show, but we
designed these to actually help performance. This not only replaces the steel
cover that always seems to rust, corrode or have the ends bent from normal
maintenance, but it has a deeper well to allow the diaphragm a less restricted
area to help suit high RPM. Comes with the correct longer Stainless screws with
built in washer, anodized black to prohibit corrosion.
Suits Walbro WT series Carburetors
$ 14.95 inc. GST
(Export price AU$ 13.60)
|
|
 |
CC Racing Stuffing Block
New CC
Racing Billet Alloy Stuffing block. If you
don't like using epoxy or fibreglass to put your
stuffing tube through your hull here is your alternative. Comes with all
Stainless Steel mounting hardware.
These will work in most Cats,
Hydros and Cracker box hulls.
Price: $
34.70 each inc. GST (Export price AU$
31.55)
|
